FISHING with SLIDING FLOAT

When the conditions of fishing need to do far casting nozzle, use equipment with sliding float. Such equipment can be used for catching predatory fish for bait fish or frog.

Before starting to catch, it is necessary to carefully measure the depth of the intended place of fishing. On the main line focus for the float (the depth of the holiday), the measured depth. Then float lowered to the cargo-fence, and push the bait on the hook, and taking out the line with his free hand above the float, make smooth casting from himself forward and upward so that the fall of the water weights and float avoid the leap from a tight line. When using gear with sufficient margin line spurt does not arise and the nozzle can save.

Usually when fishing with sliding float have to use the line length, several times exceeding the length of the rod. Therefore, it creates certain difficulties during the hurling of the nozzle and while pulling the want to ride across fish. This does not occur, if used in a snap spinning coil. You only need to ensure that the depth of the holiday float freely passed through the crossing of the ring and not let zabrosu gear. For this emphasis is most often made from stretch of soft rubber, punctures it and passing in puncture the main line. If all is caught without coil, the casting is produced as follows.

With coil remove the required number of the line, which is laid the cove on the open area of the shore. By setting an upper emphasis, a right-hand make a smooth casting. At the time of splashdown the float and the weight of the rod, which is held in the left hand, to pay off a breakthrough, serves forward. When fishing anglers have to choose the line of hands. But if on-hook caught a large fish, better, if conditions allow, to catch her, gradually receding from the water and holding the line in constant tension.