how to tie a hook to the line

Ability to properly tie a hook should each angler, who is going to catch fish fishing rod or other Kryuchkova the rigging.

The node from the line should not hostilities started when wet, and the line on the site should not обрываться, when the applied force is not less than 95 per cent of its tensile strength. The most fully meet the requirements of the nodes in the form of a spiral spring (Fig. 1). Such a center can be tied hooks with the ring and with a spatula. Tied the knot tight wraps stock hook together with pressed to his fishing line. Inflection line when it is not, that provides durability of the connection. If the spiral nodes properly tied up and tightened, they are compact and beautiful look. The site with the lock loops.

Order tie fishing line to hook this node next. Fishing line attached to the цевью hook up consistently loops a and b (Fig. 2). Loop b, line and ring (or bucket) hook clamp between the fingers (the contact area between the tips of his fingers marked by a dotted line). From left to right in a number of tightly wrap a string around stock hook, making 5-10 turns. The winding pinched between his fingers, so she has not faded and turns don't messed up.

Eliminate the loop b (Fig. 3) by pulling out on the line of the loop and on the arrow 1. Seal the winding, pulling on the end of the line on the arrow 2. Pulling the line of the arrow 3 (Fig. 5), to reduce the loop, and put in it the tip of the fishing line on the arrow 2 and tighten the noose. Loop should stop the tip of the fishing line to a node does not untied. The resulting node move to колечку (or лопаточке) hook (Fig. 5) and turned so that the line on the arrow 3 came out of the above (the soldering of a hook). Finally tighten the knot on the arrows 3 and 4.

The free end of the line cut at a distance of 2-3 millimeters from the lock loop of the node. This node is widely used fishermen, as well as for its formation does not require any tools. With its help easily and quickly tied not only hooks, but also mormyshkas. The only disadvantage is the end of the line, aiming in the direction of the stock hook, 2-3 millimeters protrudes outside the loop of the node that it can sometimes interfere with подсечке. Spiral node without the lock loop tied with the help of a needle with an eye, in which it is possible pass line. The sequence of the formation and tighten the node is shown in Fig. 6-9.

Line, a hook and a needle should be folded together (Fig. 6) and tighten with your fingers. The free end of the line make for a needle and wind on the stock hook from right to left 5-10 turns fishing line. Winding in the form of a spiral pinched between his fingers.

The tip of the line type in the eye of the needle (Fig. 7). Do not loosen the pressure of his fingers, a needle extract from the winding forth the end of the line inside the spiral (Fig. 8). Alternately pulling the line on the arrows 1 and 2, seal spiral, with the track, so that they are not messed up.

Educated node move to колечку (or лопаточке) hook and turn to the desired position, as shown in (Fig. 9). Finally tighten the knot on the arrow 3. The free end of the line cut at a distance of 0.5 millimeters from the first coil of a spiral. Both spiral node quite suitable for tying hooks, which have no ring or spatula. They are often specifically removed to obtain a subtle gear. To the node when tightening't slipped from the stock, it is useful to get and apply the layer полуды the notch with the knife or file and.

The main advantage of the spiral node is the fact that the fishing line in it tightly pressed turns to цевью and is directed along its axis, so in the process of operation practically does not fray. A hook is a continuation of the line.